Beate Øvland 8/18/22 Beate Øvland 8/18/22

How to install: Conversion Kit

Here are the instructions on how to use your conversion kit.

Sections

Different Conversion Kits

Machines with a production number of P16_900 or higher can be converted to any voltage. For older machines, conversion is only possible when your machine was originally wired as 115v or 100v.

*IMPORTANT* *Difference*: **115V VS 230V FUSE**

Where to buy Conversion Kit?

Are you interested in purchasing a Conversion kit? Visit our eshop! Note: Conversion is only possible when your machine is wired as 115v or 100v.

BUY NOW

Before you start

⚠️DISCLAIMER

Information in this document is believed to be accurate and reliable. However, the manufacturer does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of the use of such information. The manufacturer is not liable or responsible for any problems arising from the attempted repair. The manufacturer reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. The manufacturer's products are not designed, authorized, or warranted to be suitable for use in applications where failure or malfunction can reasonably be expected to result in personal injury, death, or severe property or environmental damage. The manufacturer accepts no liability for inclusion and/or use of its products in such equipment or applications and therefore such inclusion and/or use is for the customer’s own risk.

⚠️SAFETY INSTRUCTIONS

make sure the roaster is turned off
the power cord has to be unplugged
follow the steps as instructed below

CONTENTs OF THE KIT

2x Heating element (230v or 115v)
Power cord
2x Fuse (230v or 115v)

TIME

5 - 10 minutes

TOOLS

hex keys (included in package with ROEST sample roaster)

Important

For machines with production numbers lower than P16_900, conversion is only possible when your machine was wired as 115v or 100v.
To check if your machine was wired as a 115V, see the roaster’s label with the name and production number. It will say Px_xxx 115v or 110v or Px_xxxC .
Heat distribution remains the same on 230v and 115v.